PTA装置自动控制系统实现安稳运行的对策

针对PTA装置的工艺生产特点，对自动控制系统当中出现的不同种类的问题，进行了多方面的简要探讨与分析，并提出实现安稳运行相应的对策。     

智能型可控硅低频电源系统中的零电流检测电路

在矿井提升系统中,低频电源被广泛应用于提升的减速、爬行阶段,大大地提高了提升系统的运行效率和安全性。简单介绍了智能型可控硅低频电源系统的工作原理,并主要针对系统中的零电流检测问题,应用高速光耦合元件6N137设计了零电流检测电路,给出了高速光耦合元件6N137的结构和工作原理。该电路缩短了检测的时间,并提高了检测的准确性,使系统的输出性能得到很大的改善。     

10kV供电系统在煤矿生产中的应用

从多方面论证了井下超高压供电的可行性,并对矿井实际供电的应用情况进行了分 析,对6 kV、10 kV 2种供电系统的优缺点进行了对比,对大型矿井特别是超大型矿井供电提出了自 己的观点,对现代化大型矿井供电配置具有指导意义。     

Cyclic X-Y mechanical tests: A new method to perform in situ reversed-deformation experiments in the high-voltage electron microscope

There has been, in the past, only limited success with in situ cyclic or reversed plastic deformation tests in the transmission electron microscope (TEM). This is probably partly due to problems associated with buckling of the foil when an applied tensile or shear stress is reversed. Mechanical analysis shows that dislocation movement can be reversed by tensile stressing in alternating perpendicular directions (i.e., 90° rotations of a tensile stress); thus buckling of the foil can be avoided. A design for performing such X-Y in situ TEM tests is presented, with observations that demonstrate its feasibility.     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

基于TMS320F2801 DSP新型电压监测仪的设计

针对目前普遍使用的电压监测仪在运行中存在的问题,从硬件及电气回路分析不足之处,提出基于TMS320F2801 DSP的改进型电压监测仪。     

孟加拉HATHAZARI 132kV电缆回流线取舍探讨

针对孟加拉Hathazari 100MW重油发电机组EPC工程132kV电缆现场实际设计、采购和敷设情况,通过理论计算探讨回流线取舍问题。     

CS3000顺控表的组态和应用

介绍CS3000系统顺控表的结构、参数定义和功能块组态,以聚丙烯加氢控制为例,描述顺控表的组态方法、顺控动作和操作步骤等。     

串联谐振耐压试验仪的设计与仿真

针对XLPE电力电缆耐压测试成本高、操作复杂等问题,本文中设计了一种变频串联谐振耐压试验装置。利用串联谐振电路的升压原理,构建了硬件电路,通过仿真对选择谐振点等问题进行了探讨。为了改进普通串联谐振耐压测试装置寻找谐振点慢、精度低的缺点,提出了一种解决方案。仿真结果表明,该方法能精确地确定谐振点。装置输出波形可靠性好,谐波分量少,具有良好的性能。     

带曲率补偿的带隙基准电流源的设计

简单介绍了带隙基准源的基本原理,给出了一款基于Widlar结构的带曲率补偿的带隙基准电压电流源的设计方法,通过采用TSMC₀.5μm工艺库对电路进行仿真,在-40～150℃的温度范围内,其带隙基准的输出具有12ppm/℃的温度系数,电流基准的输出具有42ppm/℃。此外,文中还对曲率补偿电路的工作原理进行了分析,并且通过仿真波形对曲率补偿的工作机制进行了讨论。